Here comes the newest design 7inch Skull headlight, multi-function, can be applied to any vehicle that currently has a 7″ Factory Headlight, or has a custom fit 7″ mounting area. It’s perfect for those applications like Jeeps, Classic Cars, and Motorcycles.
FEATURES
- Easy installation – Plug & Play, Usually in 20 minutes or less,built-in anti-flicker hardness, no need extra decoder anymore!
- Super Bright – Made with original Cree Chips,50% brighter than brighter than other similar headlight.Operating Lumens Output: 6000 LM (High Beam),3200 LM (Low Beam) for each headlight.
- DOT Approved (DOT SAE HL VOL 12V LY DOT7-001) + E-Mark Approved (HR-PL-E9-01.1125) – guarantees that your lights are legal on the road, meeting section 108 requirements of the Federal Motor Safety Standards. Your DOT-compliance is clearly etched on the lens of the light. Over 80000 hours above life time.
HOW TO INSTALL
-
The 3-point plug connects your low beam and high beam
-
The blue line corresponds to the white aperture, the yellow line is the yellow aperture, and the green line is the skull flashing
SPECIFICATION
-
Current Draw: 2.47A@ 12.08V(Low beam), 3.3A @ 12.08V(High beam)
-
Raw Lumens: Low: 3300LM, High:6000LM
-
Wattage: Low: 30W, High:40W
-
Voltage: 12-24V
-
Housing Color: Black
-
IP Rating: IP68
-
Product Weight: 0.6kg / 1.32lb
-
Operating Temperature: -20 to 120 degree F
-
Size:
PACKAGE
- 1 * Skull LED Headlights
NOTE
-
Please allow slight measurement deviations due to manual measurement.
-
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed in the pictures.
